 |
| |
 |
| |
 |
| |
 |
One-Wrap® VELCRO®
Use for holding servo and radio wiring, battery and speed controller wiring and
fuel lines,too. One-Wrap® VELCRO® holds them securely in place without
damage to wiring or fuel lines. Also, a great choice for holding receivers,
speed controllers or anything that requires a secure installation but yet can be
removed quickly without tools. Can also be used as a secondary safety strap
for helicopter gyros.
One-Wrap® VELCRO® available in sizes 1/4" and 3/8" wide. Each roll contains
3 feet of One-Wrap® VELCRO®. Use 1/4" One-Wrap® for small models where
weight is a concern. Us3/8" One-Wrap® for larger models.
fuel lines,too. One-Wrap® VELCRO® holds them securely in place without
damage to wiring or fuel lines. Also, a great choice for holding receivers,
speed controllers or anything that requires a secure installation but yet can be
removed quickly without tools. Can also be used as a secondary safety strap
for helicopter gyros.
One-Wrap® VELCRO® available in sizes 1/4" and 3/8" wide. Each roll contains
3 feet of One-Wrap® VELCRO®. Use 1/4" One-Wrap® for small models where
weight is a concern. Us3/8" One-Wrap® for larger models.
1/4" One-Wrap® VELCRO®
Red
FMP1089 $2.50
FMP1089 $2.50
Blue
FMP1090 $2.50
FMP1090 $2.50
Black
FMP1091 $2.50
FMP1091 $2.50
3/8" One-Wrap® VELCRO®
Yellow
FMP1124 $2.50
FMP1124 $2.50
Green
FMP1123 $2.50
FMP1123 $2.50
Gray
FMP1125 $2.50
FMP1125 $2.50
Orange
FMP1122 $2.50
FMP1122 $2.50
Black
FMP1088 $2.50
FMP1088 $2.50
Blue
FMP1087 $2.50
FMP1087 $2.50
Red
FMP1086 $2.50
FMP1086 $2.50
One-Wrap® VELCRO® shown here securing
servo wiring to FMP Receiver/Battery
protective wrap.
servo wiring to FMP Receiver/Battery
protective wrap.
Fortune Model Products,LLC
7610 Broken Hickory Dr
Walls, Ms 38680
Ph (662)-781-8262
Fax (662)-781-8261
Email Mike@fortunemodelproducts.com
7610 Broken Hickory Dr
Walls, Ms 38680
Ph (662)-781-8262
Fax (662)-781-8261
Email Mike@fortunemodelproducts.com
VELCRO® and One-Wrap® are registered